Author Topic: The Life Of Brian  (Read 1480 times)

0 Members and 1 Guest are viewing this topic.

Offline LandyLady

  • Noob
  • *
  • Posts: 8
The Life Of Brian
« on: November 08, 2017, 09:30:43 pm »
As I assume most of you are now aware I have just purchased my first landy and he goes by the name of Brian.
DSCF6857 by Beth Ghest, on Flickr
 He needs a bit of TLC bless him, so we started with his engine problem. We discovered that he was only on 3 cylinders due to a smashed tappet slide which had caused the push rod to become jammed, so we ordered a new tappet slide, guide and roller and after reading several articles and watching a few youtube videos on tappet removal, last weekend we took the head off to replace the parts. Unfortunately we found not one but two smashed tappet slides, 2 rather battered guides and about 6 dodgy looking rollers, plus what appears to be 4 **** pistons.
DSCF6861 by Beth Ghest, on Flickr
DSCF6862 by Beth Ghest, on Flickr

So we decided to see if EskValleyBoy's spare 200tdi that has spent the last 4 years under a couple of builders bags still works. Thankfully, after a little tinkering it fired up without too much trouble. So the plan is to pop that under the bonnet which of course requires a couple of modifications so that will have to wait until the weekend.
DSCF6865 by Beth Ghest, on Flickr
In the meantime I replaced the **** sidelight lens.
DSCF6858 by Beth Ghest, on Flickr
DSCF6859 by Beth Ghest, on Flickr
Then we had a look at the brakes which appear to have taken it upon themselves to stick on, this little bugger decided to scupper the plan and fell off as we took them apart.
DSCF6878 by Beth Ghest, on Flickr

Oh well, roll on saturday for another attempt!
« Last Edit: November 20, 2017, 10:29:31 pm by LandyLady »

Share on Facebook Share on Twitter


Offline Viamphie

  • Hero Member
  • *****
  • Posts: 1510
  • You’ll know it’s me when you see me.
  • Location: HMP Morton Hall
  • Location : Swinderby
Re: The Life Of Brian
« Reply #1 on: November 09, 2017, 08:36:18 am »
It would seem he really is a naughty boy. Still it's all just little niggly bits. When you've finished tinkering with Brian feel free to come over and fit Buddy's TDi.


Sent from my iPhone using Tapatalk
The virtual cat amongst the forum pigeons

Offline Horace109

  • Sr. Member
  • ****
  • Posts: 499
  • Location : up the clump...
Re: The Life Of Brian
« Reply #2 on: November 09, 2017, 08:53:12 am »
What a cracking Landy!

is it sad that I recognised the shed from EskValleyBoy's restoration thread??

Offline Gossamer

  • Hero Member
  • *****
  • Posts: 4376
  • i would rather be happy than right!
  • Location : AbuDerby
Re: The Life Of Brian
« Reply #3 on: November 09, 2017, 10:26:47 am »
He really is a naughty boy.

I suspected a cam follower but had no idea about the other issues.

A tdi will be just the ticket for him though.

It might be worth putting 11" brakes on the front.

Good luck with the resto, Brian will enjoy having an owner with the time and skills to invest in him, he's a plucky little chap.

I look forward to seeing him at events in the near future.
All the right bits, but not necessarily in the right order.

Offline Lo-Fi

  • Administrator
  • Hero Member
  • *****
  • Posts: 605
Re: The Life Of Brian
« Reply #4 on: November 09, 2017, 05:06:06 pm »
Bad Brian! Didn't the Mintex shoes used have a problem with the spring posts not being riveted over properly? How annoying.

Love the patina, though. Hope the heart and lung transplant goes well.

Offline 94mharris

  • Sr. Member
  • ****
  • Posts: 350
  • Location : Northampton
Re: The Life Of Brian
« Reply #5 on: November 19, 2017, 08:17:18 pm »
Great looking truck! Best of luck with the rebuild :D
Katie: 1980 Series 3 SWB Station Wagon

Bertha: 1994 Range Rover Vogue 3.9 V8 EFI

Offline LandyLady

  • Noob
  • *
  • Posts: 8
Re: The Life Of Brian
« Reply #6 on: November 20, 2017, 10:25:10 pm »
So last weekend we spent Saturday firing up the 200tdi and removing the clutch and flywheel housing, ready to send the flywheel housing off for modification to fit to my series 3 box. Unfortunately for Chris I offered to remove the sump plug because I had gloves on and he didn't but I forgot that there is a little bit of pressure behind the oil when draining it and therefore I managed to drop the sump plug into the pot which then splashed all over and covered Chris up to his elbow therefore defeating the object of me wearing the gloves to drain the oil.
 DSCF6879 by Beth Ghest, on Flickr
We also started to disconnect everything to enable us to remove the old lump, including removing the front panel. On Sunday morning we set about removing the old lump and then stripped it of useful parts including the clutch for reuse with the 200tdi.
 DSCF6884 by Beth Ghest, on Flickr
Unfortunately in removing the engine it revealed a hole in the chassis so Chris went to dig out the grinder and welder to patch it up.
DSCF6889 by Beth Ghest, on Flickr
This weekend also consisted of Chris welding up holes but this time in the bulkhead, well until both of the welders gave up anyway, because the flywheel housing hasn't been returned yet. Hopefully that will be back here by next weekend so we can get on with putting the 200tdi back together and ready to go in. He patched up under the vent on the drivers side and refixed the bonnet hinge on that side, there are still a couple of holes on the passengers side which need attending to when we get the welder fixed. The holes above the vents and behind the dash will wait until the weather gets better again.
DSCF6897 by Beth Ghest, on Flickr
Unfortunately I forgot to take photos of the finished product but I'll take some next week.

« Last Edit: November 20, 2017, 10:26:49 pm by LandyLady »
Agree Agree x 1 View List

Offline cowmop

  • Full Member
  • ***
  • Posts: 112
  • Location : mow cop
Re: The Life Of Brian
« Reply #7 on: November 21, 2017, 10:53:01 am »
Gossamer you 9x9 tent frames are solid.

Sent from my SM-A520F using Tapatalk


Offline Gossamer

  • Hero Member
  • *****
  • Posts: 4376
  • i would rather be happy than right!
  • Location : AbuDerby
Re: The Life Of Brian
« Reply #8 on: November 21, 2017, 07:00:30 pm »
Gossamer you 9x9 tent frames are solid.

Thanks. the 12x12s are stronger.   wdesmle

Great work so far chaps.

Dont forget to change the ignition switch, unless you like the current quirky arrangement.

Good luck with the rest of it.
All the right bits, but not necessarily in the right order.

Offline Horace109

  • Sr. Member
  • ****
  • Posts: 499
  • Location : up the clump...
Re: The Life Of Brian
« Reply #9 on: November 22, 2017, 08:29:22 am »
Looking good!

Offline Viamphie

  • Hero Member
  • *****
  • Posts: 1510
  • You’ll know it’s me when you see me.
  • Location: HMP Morton Hall
  • Location : Swinderby
Re: The Life Of Brian
« Reply #10 on: November 22, 2017, 08:33:56 pm »
Wow what a lot done. Well done guys. If only the previous owner had as much time and deviation to the poor sod. No wonder he threw a tantrum. whstle

Hopefully now he has a loving family he’ll behave himself.
The virtual cat amongst the forum pigeons

Offline Gossamer

  • Hero Member
  • *****
  • Posts: 4376
  • i would rather be happy than right!
  • Location : AbuDerby
Re: The Life Of Brian
« Reply #11 on: November 23, 2017, 08:27:16 am »
I'm sure Brian is loving the attention.
All the right bits, but not necessarily in the right order.

Offline LandyLady

  • Noob
  • *
  • Posts: 8
Re: The Life Of Brian
« Reply #12 on: December 15, 2017, 07:35:53 pm »
Well, since my last post we seem to have spent rather a lot of time doing not a great deal...
The flywheel housing has returned and has been reattached as has the flywheel and starter motor.
DSCF6914 by Beth Ghest, on Flickr

We decided that while the engine was out we would replace the timing belt and unfortunately when we removed the cover it was discovered that one of the studs was broken and had been for quite some time, so off came the rest of the timing case and Chris spent 2 days trying to pick the remains of the rusty thread out of the engine block.
DSCF6916 by Beth Ghest, on Flickr

In the meantime I decided to start removing the seat box ready to attach the new battery tray under the passenger seat, unfortunately when we got it unbolted (after snapping several bolts and taking a hacksaw blade, hammer and chisel to another) we discovered that the back rail and passenger side end need replacing too, so we were back to waiting for parts.
DSCF6936 by Beth Ghest, on Flickr
As you can see, by this point I had become slightly annoyed with Brian and the fact that I was sitting on a piece of damp ply on the ground in the cold, so decided that he may as well make himself useful and sat on the passenger seat (which is rather comfy) to remove the seatbox.

That was nearly 2 weeks ago and we probably won't get chance to do any more until after Christmas now so poor Brian is sat cold, alone and engine-less. Although we are now in possession of the repair panels for the seat box, battery tray, spacer for remounting the alternator, radiator, intercooler and timing belt so with any luck progress shall be swift when we eventually get another crack at it as I'm itching to take him laning round a few places we've discovered at work in the last few weeks  ;D
Like Like x 1 View List

Offline Tom

  • Hero Member
  • *****
  • Posts: 854
  • Location : Neath, South Wales
Re: The Life Of Brian
« Reply #13 on: December 16, 2017, 08:09:22 pm »
awesome! Keep at it, you'll be back on the road before you know it :)

Offline Gossamer

  • Hero Member
  • *****
  • Posts: 4376
  • i would rather be happy than right!
  • Location : AbuDerby
Re: The Life Of Brian
« Reply #14 on: December 18, 2017, 09:26:34 am »
Keep at it, well done.
All the right bits, but not necessarily in the right order.