More progress! Got the welding all finished on Friday so mnaged to paint up the bulkhead a bit. First painted red oxide and then gave a coat of blue to bits I wouldnt be able to get at later on (Under door hinges and behind the wing etc.) so they all get good protection
I also found the time to fit my sunvisor
The view from inside with it fitted (please excuse the wrong sprung - thats my brothers project, an ex Gulf War 1 90FFR)
I then got my drivers wing fitted. Only stopped as I ran out of bolts to go through and hold the bonnet stay bracket. I also had to take the headlight out again as i was on my own and found it easier for pushing bolts through. If you'll notice Ive dug my checker plate out, which may yet be going on due to both battered wing tops and my habit of putting stuff on the wing top.
Also had a play around with my new arial I got from maplins, i screwed my old arial wire into the bottom.
Extends quite high up so ideal for when camping, gets an awesome signal
So thats as far as i got. tomorrow I'll fit the door and bonnet as well as refit my headlight. May even get the sill put on