Author Topic: Margaret's Rebuild (Round 2)  (Read 5250 times)

0 Members and 1 Guest are viewing this topic.

Offline Samc88

  • Hero Member
  • *****
  • Posts: 721
  • 2.5N/A - its the future
  • Location: Holyhead, Anglesey
Re: Margaret's Rebuild (Round 2)
« Reply #45 on: February 08, 2016, 08:41:24 pm »
Cheers Nellieboy, glad people are enjoying the thread :)

Made a bit more progress tonight, Got the drivers side headlamp in place along with its trim piece. Its not wired up yet as the wing needs to come back off to finish off the bulkhead. I also borrowed a 3mm drill from work which was used to finish drilling holes to fix the grill in place.



Whilst i had the drill out I decided to carry on drilling holes and fixed the screenwash bottle and pump in place (the cables and hose will be tidied up later on



also decided to fix the numberplate in place so shes got her identity back :) I will be getting some black and silver plates made up later in the year to be fitted once the tax class is changed to historic. I had to move it to the passenger side due to the winch being in the way of where it sat previously on the bracket in the middle and wasnt too keen on fixing to the grill.



Tomorrow I'll finish bolting up the passenger wing and look at the repair to the front panel to fit the sidelight
"Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws" - Douglas Adams

I love the smell of EP90 in the morning. It smells of .... Victory